Resources · Make integration

Scraptio Make integrationAutomate Scraptio with Make.

Need the emails, links or text of a website without copying them by hand? The Scraptio Make integration gives you 3 action modules, one per kind of content. This guide is for ops and growth people who want the result in a sheet or a CRM, and it walks you to a first working scenario.

Try the Scraptio integration on MakeSee the 3 modules

Verified Trustpilot reviews · AI, automation & growth agency

What you can automate

What can the Scraptio Make integration do for you?

The Scraptio Make integration links your Scraptio account to Make, a no-code tool where you build a scenario: an automation made of modules, each module being one brick that does one job. Scraptio brings three actions to that chain, and each one collects a different kind of content from a website so the next module can store it or send it on. Make gives no description for these three modules, so what this page says about them is read from their names: check it with Run once.

A prospect list that fills itself. A sales assistant keeps a list of company websites. Scrape Website Emails collects the addresses published on each site, and the next module writes them into a sheet or a CRM, one bundle (one item passed from module to module) per result.

A map of a site before an audit. An SEO consultant starts with Scrape Website Links to see which pages a site points to, then decides which ones deserve a closer look.

Page copy ready for review. A content manager runs Scrape Website Texts on a competitor page and sends the text to a document, where the team reads it without opening a browser.

Keep one limit in mind. The Make documentation for Scraptio says it was generated with AI from the vendor docs and may contain mistakes, so test every module with real data before you rely on it. The same kind of scraping can also be built in n8n; if you are weighing both tools, read n8n vs Make. For the cost side of your scenarios, see Make pricing, and if a run fails, Make troubleshooting covers the usual causes.

Connect

How do you connect Scraptio to Make?

  1. 01

    Create an API key in Scraptio

    Log in to Scraptio and open the dashboard. Click Create new API Key, give the key a title you will recognize, click Create, then copy the key shown in the window. You need an active Scraptio account for this.

  2. 02

    Add a Scraptio module in Make

    In your Make scenario, add any Scraptio module and click Create a connection. A connection is your Scraptio account linked to Make once, then reused by every Scraptio module. You can fill the Connection name field if you like.

  3. 03

    Paste the key and save

    Paste the API key you copied into the connection window, or follow the instructions Make shows on screen, then save. The module can now talk to your Scraptio account, and the next Scraptio module you add picks the same connection.

First scenario

Build your first scenario with Scraptio

GoalWhen a new website address lands in another app, Make collects that site's emails with Scraptio and stores them next to it.

  1. 01

    Create the scenario

    Open the Scenarios page in Make, create a new scenario and click the +. Pick the trigger of the app that holds your list of websites, such as a sheet where each new row carries a site address.

  2. 02

    Set up the first module

    Create the connection for that first app and choose the list Make should watch. Once the connection exists, Make shows the sheets or objects it can read, so you pick from a list.

  3. 03

    Add Scrape Website Emails

    Click the + on the right of that first module, search for Scraptio and pick Scrape Website Emails. Click Create a connection and paste your Scraptio API key.

  4. 04

    Map the website address

    Open Scrape Website Emails, read the fields Make lists and map into them the site address that comes from the first module. Then add one more module to write the emails back where your team reads them.

  5. 05

    Test with Run once

    Click Run once. Make runs the scenario a single time and shows the bundles each module received, so you can see what Scraptio returned before anything goes live.

  6. 06

    Schedule and switch on

    Open the clock on the first module to set the schedule, every 15 minutes by default, then switch the scenario on. On the Free plan, 15 minutes is the shortest interval.

Modules

What can Scraptio do in Make?

Scraptio gives you 3 modules. For each one: what it does for you, when to reach for it, and what to watch out for.

Scraptio1

Scrape Website Emails

ActionIn the docs only

This action gathers the email addresses a website shows, so you get contacts without reading each page yourself. Pair it with a sheet or CRM module to keep them.

When to use it
you have a list of company sites and want a starting point for outreach or for enriching existing records.
Watch out
each run of the module counts as an operation on your Make plan, so test on a single site with Run once before you loop over a long list.
Scraptio3

Scrape Website Texts

ActionIn the docs only

With this module you get the written content of a website as text you can store, summarize or compare. Choose it over the other two when the words on the page matter more than who to contact or where it links.

When to use it
to archive a competitor page, feed a document for review, or pass copy to another module for analysis.
Watch out
the module acts on one item per run, so a list of sites means one operation per site.
Need help

Need help automating Scraptio with Make?

A person reads every message.

FAQ

Scraptio and Make: frequently asked questions

01Is the Scraptio Make integration free?
Yes, on the Make side. Scraptio is a standard app, available from the Free plan. That plan allows 2 active scenarios, a shortest interval of 15 minutes between scheduled runs, 5 minutes of execution per run and 512 MB of data transfer. Paid plans (Core, Pro, Teams and Enterprise) bring the interval down to 1 minute and remove the cap on active scenarios. You still need an active Scraptio account, with its own subscription, since the modules use your Scraptio API key.
02What do you need to connect Scraptio to Make?
You need an active Scraptio account and an API key. Create the key from the Scraptio dashboard with the Create new API Key button, give it a title, click Create and copy the key from the window that appears. Then, in Make, add a Scraptio module, click Create a connection, optionally name it, and paste the key. That single connection serves all three Scraptio modules in every scenario you build afterwards, so you only do this once.
03Does the Scraptio module run in real time?
No. Scraptio has no trigger in Make, only three actions, so it never starts a scenario on its own. You start the scenario another way: with the schedule on the first module, every 15 minutes by default and down to 1 minute on paid plans, or with a trigger from another app placed before Scraptio, such as a new row in a sheet that holds a website address. The Scraptio module then runs each time the scenario does.
04What if a Scraptio module is missing in Make?
It depends on what you need. Scraptio offers three modules in Make, for emails, links and texts, and no Make an API Call module, so you cannot reach other Scraptio features through a raw request here. If your need goes beyond these three, look at another scraping app in the Make catalog, which has more than 3,000 standard apps, or ask the team to review your case. Also keep in mind that the Make doc for this app was AI-generated.
05Should you use Make or n8n for Scraptio?
It depends on your criteria. Make gives you three ready Scraptio modules, a visual editor and a Free plan to start with 2 active scenarios. Many apps also have an n8n node, so check whether one exists for Scraptio before you choose. Compare the modules each tool offers for this app, how your team prefers to build, and which tool already runs your other automations. Neither choice is wrong; the better one is the tool your team will actually maintain.
Same platform

Other docs you might need on this stack.

Browse all integrations