Resources · Zapier integration

Lawbrokr Zapier integrationAutomate Lawbrokr with Zapier.

Lawbrokr Zapier integration: 1 trigger, 0 actions, 0 searches. Lawbrokr pre-screens leads for law firms and hands Zapier one event: a lead that has been completed. Below: what it starts, what it costs, how to connect and what breaks.

See the 1 operations

Verified Trustpilot reviews · AI, automation & growth agency

Overview

What the Lawbrokr Zapier integration does for a law firm

Lawbrokr is a pre-screening platform that helps law firms pre-qualify the leads that reach them. Its Zapier integration turns each completed lead into the start of a Zap, the automation you build on Zapier: one trigger, then one or more actions in other apps. The point is to get qualified lead data out of Lawbrokr and into the tools the firm already uses.

Three results you can build. A hand-off: each New Lead goes straight to one action in another tool, a two-step Zap that runs on the free plan. A screened queue: a filter between the trigger and the action lets through only the leads that meet your condition, which suits a firm that already pre-qualifies. A fan-out: one completed lead feeds several actions in a row, each billed as its own task. The last two are multi-step Zaps and need a paid plan.

What Zapier does not do here: it cannot write anything into Lawbrokr, because the app offers no action, and it cannot look a lead up in it, because there is no search. It never brings in leads completed before your Zap was switched on. The good news sits on the other side: New Lead is an instant trigger, so the Zap starts the moment a lead is completed, on every plan, free included.

Comparing tools for the same job? See our n8n vs Zapier and Make vs Zapier comparisons.

Vocabulary

Zapier vocabulary in one minute

Six words carry the rest of this page.

Zap
The automation you build on Zapier. One trigger starts it, then one or more actions run every time that trigger fires.
Trigger
The event that starts a Zap. With Lawbrokr it is New Lead; once the Zap is switched on, Zapier waits for it.
Action
What the Zap does once it has started: the step that writes, sends or moves something for you in another app.
Task
The unit Zapier bills: one action that completed successfully. The monthly count on your plan is a count of those.
Instant vs polling
Instant: the app calls Zapier the moment the event happens. Polling: Zapier asks the app on a timer. New Lead is instant.
Filter
A step that lets the Zap go on only when what arrived meets the condition you set, and stops it otherwise.
Cost

What it really costs

The New Lead trigger never costs a task. Only an action that completes successfully is billed, and each one counts on its own.

  • New Lead triggerNo task, instant on every plan
  • Each successful actionCounted as a task
  • Free plan100 tasks a month, two-step Zaps
  • Premium appNo

A Zap with three actions uses three times what a one-action Zap does, a failed action is not counted, and a few apps and actions take more than one task. The free plan gives 100 tasks a month and two-step Zaps only: a filter or a second action makes the Zap multi-step, which needs a paid plan. Lawbrokr is not a premium app. New Lead is an instant trigger, so the interval grid below does not apply to it.

Connect

Connect your Lawbrokr account in three steps

  1. 01

    Open the Apps page

    Sign in to Zapier and open the Apps page of your account. Your connections live there: each one links an account to Zapier once, then every Zap reuses it. Have your Lawbrokr account ready.

  2. 02

    Add Lawbrokr

    Click + Add connection, type Lawbrokr in the search box of the dialog and pick it. Then click Add connection to open the Lawbrokr sign-in in a new tab.

  3. 03

    Sign in and grant access

    Sign in to Lawbrokr in that tab, then grant Zapier access to the account. If the leads you want the Zap to pick up are not yours, check first that your account can read them.

First Zap

Your first Zap with New Lead

GoalSend each completed Lawbrokr lead that meets your condition to another tool.

  1. 01

    Start from New Lead

    In the editor, pick Lawbrokr as the app that starts the Zap and New Lead as the event, then choose the connection you just added.

  2. 02

    Test the trigger

    Run the test. Zapier brings back the three most recent leads of the connected account, so the following steps are mapped on a real one.

  3. 03

    Add the filter

    Click the plus icon under the trigger and add a Filter: field, rule, value. A text rule only works on text and a number rule on numbers, or it never passes.

  4. 04

    Add the action

    Add the step in the other tool that should receive the lead and map the Lawbrokr details into it. Test it once and read what came back before going on.

  5. 05

    Publish

    Publish the Zap to switch it on. From then on it starts as each new lead is completed. With the filter on board, it needs a paid plan.

Triggers

The Lawbrokr trigger

1 event starts a Zap when something happens in Lawbrokr, and one of them is instant: the app calls Zapier straight away, whatever your plan.

1

New Lead

Instant trigger

In Zapier“Triggers when a new lead is completed.”

Your Zap starts as soon as a lead finishes going through Lawbrokr, and the details collected become available to every step after it.

How it fires
the app tells Zapier the moment it happens, so the Zap starts right away, whatever your plan.
When to use it
when a qualified lead should reach the person or the tool that handles it without waiting for someone to export it.
Watch out
it waits for a lead to be completed; a lead that is not completed yet does not start the Zap.
When it breaks

When it breaks

Zapier links no help article to Lawbrokr and lists no limit of its own.

The cases below come from how Zapier handles any app, plus what the trigger's own wording implies. For other cases, see Zapier troubleshooting.

  • No backfill of earlier leads

    A Zap only reacts to leads completed after it is switched on. Leads already in Lawbrokr are never picked up, and moving them is a separate job.

  • Only completed leads count

    New Lead fires when a lead is completed. A lead that never reaches that stage never starts the Zap, so nothing reaches the next steps before then.

  • Bulk arrivals held back

    If a huge batch of leads lands at once, after a bulk import or a migration, Zapier's flood protection can hold it back instead of running everything.

  • A filter changes the plan

    The free plan builds two-step Zaps. A filter between New Lead and the action makes the Zap multi-step, and it then needs a paid plan to run.
Need help

Need help automating Lawbrokr with Zapier?

A person reads every message.

FAQ

Lawbrokr and Zapier: common questions

01Is the Lawbrokr Zapier integration free?
Yes, on the free plan, as long as the Zap stays at two steps. Lawbrokr is not a premium app, so Zapier does not reserve it for paid plans. The free plan gives 100 tasks a month and builds Zaps of one trigger and one action, which covers sending each completed lead to one other tool. Add a filter, a search or a second action and the Zap becomes multi-step, which only paid plans allow.
02How many tasks does a Lawbrokr Zap use?
Only the actions count. The New Lead trigger never costs a task, so a completed lead that starts the Zap is free in itself. Each action that goes through afterwards counts as one task: one action per lead means one task per lead, three actions mean three. An action that fails is not billed. A few apps and actions take more than one task, so check the step you place after the trigger.
03Does Lawbrokr send leads to Zapier in real time?
Yes. New Lead is an instant trigger: Lawbrokr itself tells Zapier the moment a lead is completed, and the Zap starts right away. That holds on every plan, the free one included, because the interval grid of the plans only applies to polling triggers. The type comes from the app's own service, so it is not a setting to look for in the editor. A Zap built on an instant trigger shows a lightning bolt in the editor.
04What does it take to connect Lawbrokr to Zapier?
A Lawbrokr account and a Zapier account. In Zapier, open the Apps page, click + Add connection, search for Lawbrokr, click Add connection, then sign in to Lawbrokr in the tab that opens and grant Zapier access. If the leads to pick up belong to someone else, your account needs read access to them. Once made, the connection is reused by every Zap that starts from Lawbrokr, with no need to sign in again each time.
05Why did a Lawbrokr lead not start the Zap?
Most often because it was never completed, or because it came in before the Zap was published. New Lead fires on completed leads only, so a lead that is not completed does not count. A Zap also ignores everything that existed before it was switched on. And if the Zap carries a filter on the free plan, it is multi-step and needs a paid plan to run at all. Check those three points first.
06What if the Lawbrokr operation you need is not on Zapier?
Then this integration cannot do it today. Lawbrokr offers one trigger, New Lead, and no action or search, so a Zap cannot create, update or look up anything inside Lawbrokr. Everything the Zap does happens in the other apps it connects to. If the job means writing into Lawbrokr or reading something other than newly completed leads, it falls outside what the Zapier app covers, and another route has to be found.
07Zapier, Make or n8n for Lawbrokr?
It depends on your criteria, not on a ranking. On Zapier the facts are clear: one instant trigger, no premium restriction, and a free plan of 100 tasks a month limited to two-step Zaps. For Make and n8n, first check whether each offers a Lawbrokr connector and what it can do. Then compare what a run costs, whether new leads arrive as fast, and how much setup you are ready to take on.
Same platform

Other docs you might need on this stack.

Browse all integrations