Meser 10 Zapier integrationAutomate Meser 10 with Zapier.
Meser 10 Zapier integration: 3 triggers, 4 actions, 1 search. Zapier can react when a campaign finishes, an address bounces or someone unsubscribes in Meser 10, and it can add contacts, change their status, look it up, or send a single email or SMS.
Beta app Zapier still marks this integration as beta.
Verified Trustpilot reviews · AI, automation & growth agency
What the Meser 10 Zapier integration does for you
The Meser 10 Zapier integration connects an email and SMS marketing platform built for Israeli businesses to the rest of your tools. Zapier watches three events in Meser 10, writes contacts and statuses into it, and can send one transactional email or SMS at a time. The app is still listed as beta on Zapier.
Three results people build first. A mailing list that fills itself: a new form entry goes through Create or Update Contact, which adds the person to a list or updates them if the email address or phone number is already there. A confirmation for each sign-up: the next step, Send Email, sends that one person a single message such as a receipt or a confirmation. A clean record elsewhere: New Bounce and New Unsubscribe pass each failed or departed address to a spreadsheet or another tool, and Campaign Sent tells you when a send has finished.
Now the limits. All three triggers are polling, so Zapier checks Meser 10 on a timer and nothing arrives instantly. Send Email and Send SMS go to one recipient per message: they are not a way to send a campaign. A reply-to address or a sender name that Meser 10 has not verified or approved gets the message refused. And the bounce and unsubscribe triggers fire on what Meser 10 recorded, not on a status another tool writes into Meser 10 through its connection.
Comparing tools first? See our n8n vs Zapier comparison or our Zapier troubleshooting page.
Zapier words in one minute
Eight words come back all over this page. Here is what each one means, in plain terms.
- Zap
- The automation you build on Zapier: one event that starts it, then one or more steps that run every time that event happens.
- Trigger
- The event in an app that starts the Zap. Once the Zap is on, Zapier waits for it. Meser 10 has three: campaign sent, bounce, unsubscribe.
- Action
- What the Zap does once it has started: the step that writes, sends or changes something for you. Meser 10 has four.
- Task
- The unit Zapier bills. One task is one action the Zap completed successfully, and your plan's number counts those.
- Polling vs instant
- A polling trigger is checked by Zapier on a timer. An instant trigger is reported by the app itself the moment it happens. Meser 10's are polling.
- Filter
- A step that lets the Zap go on only when what arrived meets the condition you set, and stops it otherwise.
- Search step
- A step that looks up something already stored in an app so later steps can use it. Meser 10 has one: Find Contact Status.
- Multi-step Zap
- Any Zap beyond one trigger and one action. A filter, a search or a second action makes it one, and it then needs a paid plan.
What a Meser 10 Zap really costs
Meser 10 is not a premium app, so it works on the free plan. Zapier bills in tasks, and the triggers never cost one.
- Premium appNo, available on the free plan
- Free plan100 tasks a month, two-step Zaps
- Meser 10 triggers3, all polling
- Search or filterMakes the Zap multi-step, paid plan
Zapier's checks of Meser 10 for finished campaigns, bounces and unsubscribes are free, however often they run. Each action that goes through is one task, and a refused or failed one is not counted. Adding a contact and then sending a confirmation email costs two tasks per new entry, while a filtered campaign note costs one task only when it passes. The free plan gives 100 tasks a month and unlimited Zaps capped at two steps each, so that pair, or any Zap with Find Contact Status or a filter, needs a paid plan. All three triggers are polling, so the grid below sets how often Zapier looks.
Connect Meser 10 to Zapier in three steps
- 01
Open your connections
In Zapier, go to the Apps page of your account and click + Add connection. A connection is your Meser 10 account linked once, then reused by every Meser 10 step.
- 02
Pick Meser 10
Type Meser 10 in the search box of the dialog, select it, then click Add connection. A new tab opens on the Meser 10 side; keep it open until you are done.
- 03
Sign in and allow access
Log in to Meser 10 in that tab and grant Zapier access. You need a Meser 10 account, plus read or write access on anything you do not own yourself and want the Zap to touch.
Your first Meser 10 Zap, step by step
GoalPost a note in your team chat when a Meser 10 campaign finishes sending, but only for the campaigns that pass a condition you choose.
- 01
Create the Zap and set the trigger
Start a new Zap, pick Meser 10 and choose Campaign Sent. Connect your Meser 10 account first if you have not done it yet.
- 02
Test the trigger
Run the test. Zapier brings back the three most recent items from the connected account, so you see which fields arrive before mapping anything.
- 03
Add the filter
From the plus icon, add a Filter and fill its three boxes: the field to look at, the rule, and the value. Pick a text rule for text and a number rule for numbers.
- 04
Add the chat message
Add your team chat app and build the message from the fields the trigger test brought back. With the filter, this is a multi-step Zap, so it needs a paid plan.
- 05
Test, then publish
Test each step and read what came back before going further. When it looks right, click Publish to switch the Zap on for good.
Meser 10 triggers
3 events start a Zap when something happens in Meser 10. Zapier checks for them at the interval your plan allows.
Campaign Sent
Polling triggerIn Zapier“Triggers when a campaign finishes sending.”
Starts your Zap once a Meser 10 campaign has finished going out. It marks the end of a send, so it suits the jobs that should wait until everything has left: telling the team, logging the send in a spreadsheet, or starting a follow-up in another tool.
New Bounce
Polling triggerIn Zapier“Triggers when an email address bounces. Fires on a recorded delivery failure, not on a status set through the API.”
Kicks off a Zap each time an email address bounces in Meser 10. It reacts to a delivery failure that Meser 10 actually recorded and passes that address on to the next step of the Zap.
New Unsubscribe
Polling triggerIn Zapier“Triggers when an email address is removed from a mailing list. Fires on a recorded unsubscribe, not on a status set through the API.”
Runs your Zap when an email address is taken off a Meser 10 mailing list. It follows unsubscribes that Meser 10 recorded, so other tools can stop writing to people who asked out of your emails.
Meser 10 actions
Meser 10 gives you 4 actions. For each one: what it does for you, when to reach for it, and what to watch out for.
Change Contact Status
ActionIn Zapier“Sets an existing contact's status to Active, Unsubscribed or Bounced, matching the contact by email address or phone number.”
Switches an existing contact to Active, Unsubscribed or Bounced, finding them by email address or phone number. New Status is the one required choice.
Create or Update Contact
ActionIn Zapier“Creates a contact in a mailing list, or updates the existing one when the email address or phone number is already there.”
Adds a contact to a Meser 10 mailing list, or updates the one already there when the email address or phone number matches. One step covers both newcomers and returning people.
Send Email
ActionIn Zapier“Sends a single email to one recipient through Meser 10, for transactional messages such as receipts, confirmations and notifications. The reply-to address must be verified in your Meser 10 account.”
Sends one email to one recipient through Meser 10, for transactional messages such as receipts, confirmations and notifications. The body accepts HTML, and Hebrew text goes inside an element with dir="rtl".
Send SMS
ActionIn Zapier“Sends a single SMS to one mobile number through Meser 10, for one-time codes, reminders and service updates. The sender name must be approved in your Meser 10 account.”
Sends one SMS to one Israeli mobile number through Meser 10, for one-time codes, reminders or service updates. You give the number, the message and the sender name.
0501234567, so the leading zero survives, and use an approved sender name or the SMS is refused.Meser 10 search
1 search step looks for data that already exists in Meser 10, so a later step can use it.
A search step looks something up so the steps after it can use what it found. In the editor, searches sit at the bottom of the Action event list, under SEARCH. Three settings decide what happens when the result is not a single clean match.
Find Contact Status
SearchIn Zapier“Finds a contact by email address and returns its current status.”
Looks up a contact by email address and returns its current status in Meser 10, so the next step can act on it. Email Address is the only required field.
The three settings every search exposes
- Successful if no search results are found?Left on its default, a search that finds nothing stops the Zap there and the steps that depended on it are skipped. Switched on, the Zap carries on empty-handed.
- Create X if it doesn't exist yet?Ticking this box turns a search into a find-or-create and asks for the fields needed to create the missing item. Meser 10 exposes no find-or-create variant on Zapier.
- If multiple search results are found?Three ways out when several items match: keep the first one, which is the default, stop the Zap, or hand all of them on at once.
When a Meser 10 Zap breaks
Zapier lists no help article for Meser 10, and no rate limit has been recorded. The rules that do break Zaps sit in the fields of the actions and triggers themselves.
Six cases cover what goes wrong most visibly. Four come from Meser 10's own checks on senders and recipients, two from how Zaps work in general.
Reply-To address not verified
Send Email requires a Reply-To address verified in your Meser 10 account. Any other address gets the message refused.Sender name not approved
Send SMS needs a sender name or number approved in your Meser 10 account. An unapproved sender is refused, and nothing goes out.Leading zero lost on the number
To Phone expects an Israeli mobile number sent as text. Send it as text so the leading zero is kept, for example by mapping a text column.Unsubscribed recipients skipped
Send Email does not send to a recipient who unsubscribed from your account, and the Unsubscribed status stops all future sending to that contact.No catch-up on old events
A Zap only reacts to what happens after you switch it on. Bounces and unsubscribes recorded earlier are not picked up; moving them is a separate job.A Zap that triggers itself
As a general precaution, a Zap that writes into the very place its own trigger watches can set itself off again and again, and burn through your tasks.
Need help automating Meser 10 with Zapier?
A person reads every message.
