Resources · Make integration

Snipcart Make integrationAutomate Snipcart with Make.

What if every Snipcart order could start its own follow-up without you touching it? The Snipcart Make integration gives you 18 modules: 1 instant trigger, 6 actions and 11 searches. This page shows store owners how to connect the account, build a first scenario and pick the right module.

Try the Snipcart integration on Make See the 18 modules

Verified Trustpilot reviews · AI, automation & growth agency

What you can automate

What can the Snipcart Make integration automate?

The Snipcart Make integration links your store account to Make, a no-code tool where you build a scenario: the automation itself, a chain of modules that each do one job. Snipcart tells Make when an order moves, and Make can then read orders, customers and products, or act on them with refunds and status updates.

React to a finished sale. The Watch Events trigger fires when an order is completed, so the order details can land in your spreadsheet or your accounting tool without a copy and paste.

Handle refunds from your support desk. When a return is approved in another app, Get an Order checks the purchase and Create a New Refund sends the money back, all inside the same scenario.

Win back abandoned carts. List Abandoned Carts pulls the carts customers left behind, ready to feed an email tool or a sales list.

The listed modules do not cover every corner of the Snipcart API. For the rest, Make an API Call reuses the same connection to reach any endpoint. If you are still weighing tools, the n8n vs Make comparison lays out the differences, and Make pricing explains what each plan allows. Stuck on a failing run? Make troubleshooting covers the usual fixes.

Connect

How do you connect Snipcart to Make?

01
Copy your API key in Snipcart
In Snipcart, open Account in the main menu, then Credentials in the submenu. Copy the API key shown there. You need an active Snipcart account for this, since Make signs in with that key.
02
Add a Snipcart module in Make
In your scenario, add any Snipcart module and click Create a connection. A connection is your Snipcart account linked to Make once, then reused by every Snipcart module you add later.
03
Name it and paste the key
The Connection name field is optional, but a clear label such as the store name helps when you run several shops. Paste the API key you copied, save, and Make can now read and write your store data.

First scenario

Your first scenario: refund an order approved elsewhere

GoalWhen a return is approved in your helpdesk app, Make finds the Snipcart order and issues the refund.

01
Create the scenario
On the Scenarios page, create a new scenario and click the big +. Pick the module of the app where returns get approved, such as your helpdesk, and connect it.
02
Fetch the order
Click the + on the right of that first module, search for Snipcart and choose Get an Order. Map the order ID coming from the ticket into the module so Make pulls the matching purchase.
03
Add the refund
Add Create a New Refund after Get an Order. It reuses your Snipcart connection, and you map the order found in the previous step so the money goes back on the right purchase.
04
Test with Run once
Approve a test return, then click Run once. Open each module to read the bundles it received: a bundle is one item passing through, here one ticket and one order. Use a test order, because a refund is real.
05
Schedule and switch on
If that first module is a scheduled trigger, set its clock (every 15 minutes by default), then switch the scenario on. From now on each approved return ends as a Snipcart refund without a manual step.

Triggers

What starts a Snipcart scenario

1 module starts a scenario when something happens in Snipcart. A scheduled trigger is checked by Make on the scenario's schedule; an instant one is called by Snipcart as soon as it happens.

Snipcart1Watch Events

Watch Events

Instant trigger

In Make“Triggers when order is completed, order status changes, payment status changes, order tracking number changes, order is refunded or when a new notification is created.”

This trigger gives your scenario a starting signal each time something important happens in the store: an order completed, a change of order or payment status, a new tracking number, a refund, or a fresh notification on an order. One trigger, six kinds of store events.

How it fires

instant, Snipcart calls Make through a webhook as soon as the event happens, shown by the lightning badge on the module.

When to use it

pushing each completed order to your accounting sheet, or alerting the warehouse when a tracking number is added.

Watch out

if the scenario later refunds, updates or annotates an order, that change is itself an event, so add a filter or the scenario will call itself again.

Modules

Everything Snipcart can do in Make

Snipcart gives you 17 modules. For each one: what it does for you, when to reach for it, and what to watch out for.

Snipcart1

Create a New Refund

Action

In Make“Creates a new refund for the specified order.”

Sends money back to a buyer on a given order, straight from your scenario, so an approved return no longer waits for someone to log into Snipcart.

When to use it

after a return is validated in your helpdesk or a form, once the order has been confirmed with Get an Order.

Watch out

the money really leaves your account, so test it with Run once on a test order first.

Snipcart2

Create a Notification

Action

In Make“Creates a new notification for the specified order.”

Attaches a new notification to an order, which keeps the history of what happened to a purchase inside Snipcart itself, where your team already looks.

When to use it

logging that a parcel left the warehouse or that a support ticket was opened about this order.

Watch out

Watch Events also fires on new notifications, so a scenario that starts on that trigger and ends here needs a filter to avoid running in circles.

Snipcart3

Get an Abandoned Cart

Action

In Make“Retrieves an abandoned cart by its ID.”

Opens one abandoned cart by its ID and hands its content to the next module, so you can see exactly what a shopper left behind before deciding how to follow up.

When to use it

you already hold a cart ID, for example from List Abandoned Carts or from a previous step, and want the full detail of that single cart.

Snipcart4

Get an Order

Action

In Make“Retrieves an order by its ID.”

Retrieves one order from its ID, with everything Snipcart knows about it, so later modules work on fresh data rather than on what another app remembers.

When to use it

before a refund or a status update, to confirm the order exists and read it first.

Watch out

it needs the exact ID; when you only know the buyer, start with List Customer's Orders.

Snipcart5

Make an API Call

Action

In Make“Performs an arbitrary authorized API call.”

Covers what the other ready modules leave out: it lets your scenario call any endpoint of the Snipcart API with the connection you already set up, no new credentials required.

When to use it

a data point or an action you need is not in the list of ready modules.

Watch out

you describe the request yourself here, so keep the Snipcart API reference open while you fill it in.

Snipcart6

Update an Order

Action

In Make“Updates the status (required) and other parameters of the selected order.”

Changes the status of an order, which is the one required setting, and optionally other details, so your store reflects what really happened in the warehouse or in shipping.

When to use it

moving an order to its next status once the carrier app confirms the pickup.

Watch out

a status change fires Watch Events again, so a scenario that listens to that trigger must filter out its own updates.

Snipcart7

Get a Customer

In Make“Retrieves a customer by ID.”

Brings back the profile of one customer from their ID, handy when a scenario already knows who bought and now needs the rest of the record to personalize a message or fill a CRM.

When to use it

right after an order event, to enrich the buyer before sending them to your mailing list.

Snipcart8

Get a Product

In Make“Retrieves a product by its ID.”

Reads one product of your catalog from its ID and passes its details along, which saves you from keeping a second copy of product data in a spreadsheet.

When to use it

an order names a product and your next module, a stock sheet or a supplier email, needs that product's details.

Watch out

without the ID, use List Products instead.

Snipcart9

Get a Refund

In Make“Retrieves the specified refund information.”

Pulls the information of one specific refund, so your scenario can confirm what was sent back before it tells the customer or updates your books.

When to use it

after Watch Events reports a refunded order, to copy the refund into your accounting tool.

Watch out

to see every refund on an order at once, List Refunds fits better.

Snipcart10

List Abandoned Carts

In Make“Retrieves abandoned carts by your specifications.”

Returns the abandoned carts that match the criteria you set, each cart as its own bundle, so you can build a recovery flow without exporting anything by hand.

When to use it

feeding an email tool with shoppers who left items behind.

Watch out

each cart that comes out counts as a bundle, so every following module runs once per cart and spends one operation, a single run of one module, each time.

Snipcart11

List Customers

In Make“Retrieves all customers.”

Retrieves all the customers of your store in one go, one bundle per person, which is the quickest way to sync your buyer base with a CRM or a newsletter tool.

When to use it

a first import of your customers into another app.

Watch out

it returns the whole list, so on a large store the next modules may consume many operations in a single run.

Snipcart12

List Customer's Orders

In Make“Retrieves all orders of specified customer.”

Collects every order placed by one customer, letting your scenario see the full buying history of a person instead of a single purchase.

When to use it

spotting repeat buyers after a completed order to tag them as loyal in your CRM.

Watch out

you need the customer first, from Get a Customer or from the order event.

Snipcart13

List Domains

In Make“Retrieves all domains.”

Lists all the domains tied to your Snipcart account, a small but useful check when several sites share the same store setup and you want to know which ones are declared.

When to use it

an agency or a merchant running many storefronts wants an inventory of domains in a sheet.

Snipcart14

List Notifications

In Make“Retrieves all notifications of the specified order.”

Fetches all the notifications recorded on one order, so you can read its timeline from Make and pass it to your support team or an archive.

When to use it

a customer asks where their parcel is and the ticket should show the order history.

Watch out

it works order by order, so provide the order first with Get an Order or the trigger.

Snipcart15

List Orders

In Make“Retrieves orders by your specifications.”

Searches your orders by the criteria you choose and returns each match as a bundle, which beats the order screen when a report needs many orders at once.

When to use it

building a sales report in a spreadsheet, or finding the order behind a support request when you lack its ID.

Watch out

the search can return zero orders, so plan what the scenario does then.

Snipcart16

List Products

In Make“Retrieves products by your specifications.”

Returns the products that fit your criteria, each one as a separate bundle, a simple way to mirror your Snipcart catalog in another tool.

When to use it

keeping a stock sheet or a marketplace listing aligned with the products in your store.

Watch out

when you know one product's ID, Get a Product is lighter and spends fewer operations.

Snipcart17

List Refunds

In Make“Retrieves all refunds of the specified order.”

Shows every refund made on one order, so the scenario can tell whether a purchase was partly or fully paid back before it takes the next step.

When to use it

before issuing a new refund, to check the order has not already been reimbursed by a teammate.

Watch out

it looks at one order only; you must pass that order in first.

Need help

Need help automating Snipcart with Make?

A person reads every message.

FAQ

Snipcart and Make: common questions

01Is the Snipcart Make integration free?

Yes, on the Make side. Snipcart is a standard app, available from the Free plan onward. The Free plan allows 2 active scenarios, a minimum of 15 minutes between two scheduled runs, 5 minutes of execution per run, files up to 5 MB and 512 MB of data transfer. Paid plans (Core, Pro, Teams and Enterprise) lift the interval to 1 minute and remove the cap on active scenarios. Usage is counted in operations, one run of one module on one item. You still need an active Snipcart account; for its subscription, Snipcart points to its own pricing page.

02What do you need to connect Snipcart to Make?

An active Snipcart account and its API key. In Snipcart, go to Account in the main menu, then Credentials, and copy the key displayed there. In Make, add any Snipcart module, click Create a connection, give it a name if you like, and paste the key. If the first module is Watch Events, which carries the instant tag, click Create a webhook before creating the connection. The connection is saved once and reused by every Snipcart module in your scenarios.

03Does the Snipcart trigger in Make fire in real time?

Yes. Watch Events is an instant trigger: Snipcart calls Make through a webhook as soon as an event happens, so the scenario starts right away instead of waiting for a schedule. It covers completed orders, order status changes, payment status changes, tracking number changes, refunds and new notifications. Keep in mind that your own scenario can create some of these events, for example by updating an order or adding a notification, so filter those out to avoid a scenario that restarts itself.

04What if a Snipcart module is missing in Make?

Use Make an API Call. This module reaches any endpoint of the Snipcart API with the connection you already have, so an action or a data point absent from the ready modules is still within reach. You write the request yourself, which asks for a look at the Snipcart API reference. Also note that the Make documentation for Snipcart is flagged as AI-generated from the official Snipcart docs and may contain mistakes, so check important details with Snipcart directly before relying on them.

05Should you use Make or n8n for Snipcart?

It depends on what you value. Make offers 18 ready Snipcart modules, including an instant trigger, and a visual editor where each step is a module you click together, which suits someone building their first automation. The same app often has a node in n8n too, so if your team already works there, check its catalog before switching. The deciding question is which tool your team will maintain every day, not which one has the longer list. The comparison page linked above goes through the criteria in detail.

Copy your API key in Snipcart

Add a Snipcart module in Make

Name it and paste the key

Create the scenario

Fetch the order

Add the refund

Test with Run once

Schedule and switch on

Need help automating Snipcart with Make?