Resources · Zapier integration

mission‹one› dialog+ Zapier integrationAutomate mission‹one› dialog+ with Zapier.

The mission‹one› dialog+ Zapier integration gives you 0 triggers and 2 actions. Another app starts the Zap, then mission‹one› dialog+ creates a subscription for an email address, or deactivates one, inside a given project.

See the 2 operations

Verified Trustpilot reviews · AI, automation & growth agency

Overview

What the mission‹one› dialog+ Zapier integration is for

mission‹one› dialog+ is an email marketing tool. Its Zapier integration lets your other apps manage who is subscribed: when something happens elsewhere, a Zap adds an email address to a project's subscribers, or deactivates that subscription. It only receives; nothing in mission‹one› dialog+ can start a Zap.

Two results you can build, plus a third from combining them. A list that grows from your forms: each new submission runs Create Subscription, and the address joins the project you chose. A clean opt-out: when a contact is marked as leaving in your CRM, Deactivate Subscription switches their subscription off in the same project. A list kept in step with a spreadsheet: one Zap creates subscriptions from new rows, another deactivates them from a second sheet, and both run without anyone touching the newsletter tool.

What Zapier does not do for mission‹one› dialog+. There is no trigger, so an open, a click or an unsubscribe inside the tool cannot start a Zap. There is no search step, so a Zap cannot check whether an address is already subscribed. There is no action to send a mailing either: only the two subscription actions. Every Zap starts in another app, whose trigger sets the pace, and nothing from before the Zap was switched on is picked up.

Still choosing a tool? Open our n8n vs Zapier page before you build.

Vocabulary

Zapier words, in one minute

Seven terms, one line each, before you start building.

Zap
Your automation on Zapier: one trigger, then one or more actions that run every time the trigger event happens.
Trigger
The event that starts the Zap. With mission‹one› dialog+, it always comes from another app, such as a form or a CRM.
Action
What the Zap does once started: here, creating or deactivating a subscription in mission‹one› dialog+.
Task
The unit Zapier bills: one action your Zap completes successfully. Your plan's allowance is a count of those.
Polling vs instant
Zapier checks a polling trigger on a timer; an instant trigger is reported by its app the moment the event happens.
Filter
A step that lets the Zap carry on only when what arrived meets your condition, and stops it otherwise.
Multi-step Zap
Any Zap beyond one trigger and one action: a second action, a filter or a search. It needs a paid plan.
Cost

What a mission‹one› dialog+ Zap costs

Zapier bills actions, not triggers. mission‹one› dialog+ is not a premium app, so it works from the free plan.

  • Trigger in the other app0 tasks
  • Subscription created or deactivated1 task each
  • Free plan100 tasks a month, two-step Zaps
  • Premium appNo

The trigger in your other app costs nothing. Each subscription created or deactivated successfully counts one task; a failed action counts none. A Zap with three actions uses three times what a one-action Zap does. The free plan gives 100 tasks a month and unlimited Zaps, each limited to two steps: one trigger, one action. A filter or a second action makes it a multi-step Zap, which needs a paid plan. mission‹one› dialog+ has no trigger of its own, so the grid below matters only if the app that starts your Zap uses a polling trigger.

Connect

Connect mission‹one› dialog+ to Zapier in 3 steps

  1. 01

    Open your apps

    On Zapier, open the Apps page of your account and click + Add connection. Search for mission‹one› dialog+ in the dialog and pick it. You need an account on the tool first.

  2. 02

    Sign in

    Click Add connection and sign in to mission‹one› dialog+ in the tab that opens. You also need read or write access on anything you do not own yourself and want the Zap to touch.

  3. 03

    Grant access

    Allow Zapier to reach the account. The connection is then reused by both actions, in this Zap and in the next ones, without signing in again each time.

First Zap

Your first mission‹one› dialog+ Zap: form signups to subscribers

GoalEach form submission that meets your condition creates a subscription in your mission‹one› dialog+ project.

  1. 01

    Set the trigger

    Create a Zap and pick your form tool as the app that starts it, with its new submission event. Test it so Zapier brings back real submissions to map from.

  2. 02

    Add the filter

    Add a Filter from the plus icon and set its three boxes: the field, the rule, the value. A filter makes the Zap multi-step, so it needs a paid plan.

  3. 03

    Add Create Subscription

    Pick mission‹one› dialog+ and Create Subscription. Fill in the Project ID, map Email to the form's email field, and fill in After Insert Action, which is required.

  4. 04

    Test the action

    Run the test once and read what came back before going further. Then check in mission‹one› dialog+ that the address landed in the right project.

  5. 05

    Publish

    Publish the Zap to switch it on. Only submissions received after that point will run it. On the free plan, drop the filter and keep two steps.

Actions

mission‹one› dialog+ actions: what a Zap can do

mission‹one› dialog+ gives you 2 actions. For each one: what it does for you, when to reach for it, and what to watch out for.

1

Create Subscription

Action

In Zapier“Creates a new subscription”

Adds a new subscription in mission‹one› dialog+. Three fields are required: the Project ID, the Email to subscribe and an After Insert Action.

When to use it
a signup form or a CRM collects email addresses, and each one should join your newsletter project.
Watch out
After Insert Action is required, and nothing here says what it does or accepts; look at the field in the editor and check the result at test.
2

Deactivate Subscription

Action

In Zapier“Deactivates a subscription”

Switches off an existing subscription. It needs the Project ID and the Email of the subscriber, both required.

When to use it
someone opts out in another tool, and your newsletter should stop reaching them too.
Watch out
the Project ID must be the one the address was subscribed to; check at test before publishing.
When it breaks

When a mission‹one› dialog+ Zap breaks

Zapier attaches no help article to mission‹one› dialog+, and no limit specific to the app is documented. What can go wrong is what goes wrong on any Zap.

Three cases to read before publishing. For the day a run fails anyway, keep our Zapier troubleshooting page at hand.

  • Past signups never arrive

    A Zap only reacts to what happens after it is switched on. People who signed up before are not picked up; moving that backlog is a separate job.

  • The Zap keeps starting itself

    A Zap that writes into the place its own trigger watches can set itself off again and again, and burn through tasks. Keep the two apart.

  • A bulk import is held back

    When the trigger app suddenly returns a huge batch, after an import or a migration, Zapier's flood protection can hold that batch back.
Need help

Need help automating mission‹one› dialog+ with Zapier?

A person reads every message.

FAQ

mission‹one› dialog+ Zapier integration: common questions

01Is the mission‹one› dialog+ Zapier integration free?
Yes. mission‹one› dialog+ is not a premium app, so both actions work on Zapier's free plan. That plan gives 100 tasks a month and unlimited Zaps, each built from two steps: one trigger and one action. A form submission that runs Create Subscription fits. Put a filter in front to subscribe only some of them, or add a second action, and it becomes a multi-step Zap that needs a paid plan.
02How many tasks does a mission‹one› dialog+ Zap use?
One task per successful action, and nothing for the trigger. A form Zap that runs Create Subscription costs one task per submission. A CRM Zap that runs Deactivate Subscription costs one task per opt-out. If a single Zap both creates a subscription and posts a chat message, that is two tasks per run. An action that fails is not counted against your plan. The trigger in the other app never costs anything, however often it fires, so only the work done in the tools counts.
03Can mission‹one› dialog+ start a Zap in real time?
No. mission‹one› dialog+ has no trigger on Zapier, so nothing that happens in it can start a Zap. Your Zap always starts in another app, and that app's trigger sets the pace. If it is an instant trigger, the Zap starts right away. If it is a polling trigger, Zapier checks it at your plan's interval: every 15 minutes on Free, every 2 on Professional, every minute on Team and Enterprise.
04What does it take to connect mission‹one› dialog+ to Zapier?
An account on mission‹one› dialog+, plus read or write access on anything you do not own yourself and want the Zap to touch. On Zapier, open the Apps page, click + Add connection, search for the app and pick it, click Add connection, sign in in the tab that opens and grant access. Have your Project ID ready: both actions require it, along with the subscriber's email. The connection is then reused by both actions in all your Zaps, without signing in again.
05What is the After Insert Action field in Create Subscription?
It is one of the three required fields of Create Subscription, next to Project ID and Email. Zapier's listing gives its name and nothing about what it does, so do not guess from the label. Look at the field in the editor when you set up the step, fill it in, run the test once, and check in mission‹one› dialog+ how the new subscription looks. Only publish once that result matches what your newsletter process expects. The field is required, so plan for it before you build the rest of the Zap.
06What if a mission‹one› dialog+ operation is missing from Zapier?
Check the app's page on Zapier, which shows the current list: two actions today, and no trigger. If what you want is not there, for example sending a mailing, the integration does not offer it. Look first at whether the two actions cover the need: Deactivate Subscription, for instance, handles opt-outs coming from another tool. Otherwise that step stays in mission‹one› dialog+, and the Zap handles the rest. Each action listed there can be picked in the editor today.
07Zapier, Make or n8n for mission‹one› dialog+?
Choose by criteria, not a ranking. First, the starting point: with no trigger here, the app that starts your Zap decides how fast it runs. Second, coverage: check whether the other tool lists mission‹one› dialog+ and its subscription actions. Third, billing: Zapier counts one task per successful action, so a Zap that subscribes someone and also notifies the team costs two per run. Fourth, which tool your team already maintains.
Same platform

Other docs you might need on this stack.

Browse all integrations